CCTV CAMERAS


sw30.gif (11528 bytes)

It requires NO VCR

No video Casettes

No memory cards

No compuers

No PIRS

No Cabling hassles

No esclosure assembly

none At Home
This unit can monitor the front door, driveway, backyard, foyer, or anywhere, giving homeowners the ability to identify intruders, or simply know who was there while they were out.

At the Office
By itself, or working with the existing security system, This unit can add the power of video surveillance to any office, factory or retail location. Break-ins, or even after-hours incursions by employees can all be recorded as evidence.

In Access-Controlled Facilities The unit can interface with virtually any access control system to provide a recorded image of every person entering or leaving designated areas.

This unit   removes all of the hassles of integration, assembly, cabling and testing associated with traditional CCTV systems, while significantly reducing the cost.

a division of Watec Co., Ltd


GW-221S
1/2" IT CCD Image sensor

GW-231S
1/3" IT CCD Image sensor
202B
GW-202B
1/3" IT CCD Image sensor
Three Position White Balance Mode (Incandescent Lamp, Daylight, Automatic). AGC ON/OFF Selection Switch. Manual Color Adjustment (White Balance). Electronic Shutter. Horizontal resolution: 420TV Lines. Minimum Illumination: 3 lx. F1.2 (High Gain Position).
202D
GW-202D
1/3" IT CCD Image sensor
It employs DSP (Digital Signal Processing). Horizontal high resolution: 450TV lines. Minimum required illumination, 1.0 lx. (F1.2, AGC High). Electronic Iris, Manual with 6 shutter speed settings available. White balance correction is selectable in accordance with your required application - Automatic correction, Incandescent lamp (3200K), Fluorescent lamps (4200K or 5100K), Daylight or PWB (Push lock W/B). AGC ON/OFF switch, AGC gain conversion switch (High/Low) and Gamma ON/OFF switch are housed within the unit. Back light compensation function is also provided.
230
GW-230
1/4" IT CCD Image sensor
Compact and lightweight. It employs DSP(Digital Signal Processing), enabling a clear improved image on the monitor screen. Detachable microlens series with several different focal lengths available. Automatic white balance function is included as standard.
240R
GW-240R
1/4" IT CCD Image sensor
It employs DSP(Digital Signal Processing), enabling a clearer improved image on the monitor screen. Automatic white balance, AGC-ON and Backlight compensation are included as standard.

 

WATER-RESISTANT
200D
GW-200D
1/3" IT CCD Image sensor Color
It employs DSP (Digital Signal Processing). Equiped of varifocal auto iris zoom lens f4.0mm~8.0mm, F2.0~2.8. The power source and video signal are transmitted on a single-line coaxial cable. Indoor/Outdoor usage (Water-Resistant). Horizontal resolution: 470TV lines requiring a minimum illumination of 1.0 lx. F1.2.
DOME TYPE
207CD
GW-207CD
1/4" IT CCD Image sensor Color
A lightweight (145g) compact camera. Main features include, white balance function and electronic iris function. Standard lens is f3.8mm, F2.0. Horizontal and vertical rotations of the camera are adjusted manually. Horizontal resolution: 320TV lines. Minimum required illumination, 5 lx. F2.0. Power supply, DC 6 Volts.
208
GW-208
1/3" IT CCD Image sensor Color
It employs DSP (Digital Signal Processing). High horizontal resolutions of over 460 (NTSC) and 450 (PAL)TV lines. A clear picture can be obtained for any object by using the 12 X power zoom lens in combination with real-time focusing function. It employs endless horizontal rotation through 360. A single coaxial cable (3C2V) enables the multiplex transmission to combine the GW-208 with the GW-208CB. Minimum required illumination, 7.0 lx. F1.8.

 

 

Supplied with 10

 

Identical Buttons

 

to Match

 

Camera Button

 

 

 

Also Available

 

in

 

Black & White

 

 

Screw Camera

 
 

Button & Screw Camera, Self-Contained

 

Ultra Small Package

 

for Various Applications

 

MCM PCB Design for Minimizing size and

 

Improving Durability.

LCL-622 DSP (10 Bit)
Ultra Compact Color
Button Camera
 
Pick-Up Element: 1/4" Interline CCD
Picture Elements: 250K Pixels (LCL-145A)
Focal Length: 3.6mm Pinhole Lens H-Angle 69º
Sync System: Internal
Scanning System: 2:1 Interlace
Video Output: 1V P-P (75 ohms)
Resolution: >330TV Lines
Sensitivity: 5 Lux @ f2.6
S/N Ratio: >46dB (AGC Off)
Electronic Shutter: 1/60 -1/10,000 Sec
Gamma: 0.45-1
Power Supply: 5V DC ±10% (160mA)
Button Size: ø12.5mm
Operational Temperature: -0° C~ +40°C
Weight: Approx. 5g
Camera Dimensions
  0.86" x 1.02" x .52"
 
 *For use with the LCL-AD505 5V DC power supply

 

 

 

 
1/4" DSP CCD Color
with MIRROR IMAGE SWITCHABLE
 
Pick-up Element: 1/4" CCD Image Sensor
Picture Element : NTSC=768(H) x 494(V)
                                 PAL = 811(H) x 508(V)
Lens Mount: "CS" Mount
H Drive Freq: NTSC=15.734 KHz
                           PAL= 15.625KHz
Sync System: Internal
Scanning System: 2:1 Interlace
Video Output: 1.0 V p-p 75 ohms (Composite & Y/C)
Resolution: 430 TV Lines
Minimum Illumination: 2.0 lux @ f1.4 (AGC HI)
S/N Ratio: >48dB
Eletronic Iris: Elect Iris: 1/60~1/120,000 (NTSC)
                                                  1/50~1/12,000(PAL)
Gamma: 0.45-1
AGC: On/Off Selectable
Power Supply: 12V DC 10% (140mA)
Operating Temp: -5ºC - +40º C
Weight: 75g
Camera Dimensions
  37.2mm x 37.2mm x 66mm  
 

 

 

Special Applications

  • Aerospace Industry
  • Industrial
  • Medical
  • Nuclear Plants
  • Surveillance
 
LCL-628
7.5 mm (19/64") Diameter
 
 
Remote Head
1/4" 10 Bit DSP Color CCD Camera
330 TV Lines
3.9mm Lens f2.8 (H-52º, V-40º)
DC 9v (100mA)
 
Cable Length is Available in Standard
2 meters
Head Size
7.5mm 19/64"
 

 

 

 

 

   

 

 

1/3" DSP CCD Color
Hi-Resolution and Hi-Sensitivity Camera with BNC video, YC/S - Video Output and RS- 232 Interface
 
Pick-up Element: 1/3" CCD Image Sensor
Picture Element : NTSC=768(H) x 494(V)
PAL = 811(H) x 508(V)
Lens Mount: "CS" Mount
H Drive Freq: NTSC=15.734 KHz
PAL= 15.625KHz
V Drive Freq.: NTSC= 59.97 Hz
Pal= 50.0Hz
Sync System: Internal
Scanning System: 2:1 Interlace
Video Output: 1.0 V p-p 75 ohms (Composite & Y/C)
Resolution: 480 TV Lines
Minimum Illumination: 1.0 lux @ f1.2 (AGC HI)
S/N Ratio: >46dB (AGC OFF)
Eletronic Shutter: Elect Iris: 1/60~1/10,000 (NTSC)
1/50~10,000(PAL)
Shutter Speed: Selectable - Flickerless Shutter
Auto Iris: Brightness Shutter
Backlight Compensation: Selectable
Negative/Positive: Selectable
Gamma: 0.45-1
White Balance: Auto/Lamp/Sun
AGC: On/Off - High/Low
Power Supply: 12V DC 10% (140mA)
Operating Temp: -10ºC - +40º C
     
Camera Dimensions
  40mm x 40mm x 47.4mm 1.57" x 1.57" x 1.87" 
 
 *For use with the WAT-AD901 12V DC power supply

 

 

 

 
LCL-217HS
Image Sensor: 1/3" CCD Interline Transfer
Picture Element:
NTSC=768(H) x 494(V)
PAL = 811(H) x 508(V)
Lens Mount:
"CS" Mount
H Drive Freq:
NTSC=15.734 KHz PAL= 15.625 KHz
V Drive Freq:
NTSC= 59.97 Hz Pal= 50.0 Hz
Sync System:
Internal
Scanning System:
2:1 Interlace
Video Output:
1.0 V p-p 75 ohms (Composite)
Resolution:
480 TV Lines
Min. Illumination:
0.2 Lux @ f1.2 (AGC HI)
S/N Ratio:
>50dB (AGC OFF)
Electronic Shutter:
Selectable - Flickerless Shutte
Shutter Speed:
1/60~1/10,000 (NTSC) 1/50~10,000(PAL)
Auto Iris:
Brightness Shutter
Backlight Compensation:
Selectable
Gamma:
0.45-1
White Balance:
Auto/Lamp/Sun
AGC:
ON/OFF - High/Low
Power Supply:
12V DC 10% (140mA) (WAT-AD912)
Operating Temp:
-10ºC - +40º C
Weight:
Approx. 100g
Camera Dimensions
 

 34 mm x 37mm x 52mm

 

64mm Including the BNC

 

1.34" x 1.45" x 2.04" 

 

2.51" Including the BNC

 
 *For use with the LCL-AD912 12V DC power supply

 

 

 

Supplied with 10

 

Identical Buttons

 

to Match

 

Camera Button

 

 

 

Also Available

 

in

 

Black & White

 
 

Button Camera, Self-Contained

 

Ultra Small Package

 

for Various Applications

 

MCM PCB Design for Minimizing size and

 

Improving Durability.

LCL-622 DSP (10 Bit)
Ultra Compact Color
Button Camera
 
Pick-Up Element: 1/4" Interline CCD
Picture Elements: 250K Pixels (LCL-145A)
Focal Length: 3.6mm Pinhole Lens H-Angle 69º
Sync System: Internal
Scanning System: 2:1 Interlace
Video Output: 1V P-P (75 ohms)
Resolution: >330TV Lines
Sensitivity: 5 Lux @ f2.6
S/N Ratio: >46dB (AGC Off)
Electronic Shutter: 1/60 -1/10,000 Sec
Gamma: 0.45-1
Power Supply: 5V DC ±10% (160mA)
Button Size: ø12.5mm
Operational Temperature: -0° C~ +40°C
Weight: Approx. 5g
Camera Dimensions
  0.86" x 1.02" x .52"
 
 *For use with the LCL-AD505 5V DC power supply

 

 

 
LCL-613 (NTSC/PAL) 1/4" DSP
COLOR CAMERA
 
Pick-Up Element: 1/4" Interline CCD
Picture Elements: NTSC: 512(H) x 492(V)
PAL:512(H) x 582(V)
Sync System: Internal
Frequency: NTSC15.734KHz (H) 59.97Hz (V)
Scanning System: 2:1 Interlace
Resolution: 330TV Lines
Minimum Illumination: 5 Lux @ f2.8
S/N Ratio: >46dB (AGC Off)
Lens: F=4.6mm Pinhole (H) 45º (V) 34º
Electronic Shutter: Electronic Iris 1/60 -1/96,000 (NTSC)
Gamma: 0.45-1
AGC: ON
White Balance: Auto Tracking White Balance
Power Supply: DC 4.8 - 5.5V (LCL-AD505)
Current: 160mA (at5V)
Operational Temperature: -0° ~ +40°C
Weight: Approx. 20g
Camera Dimensions
   28mm x 24mm x 19mm 1.12" x 1.94" x 0.75" 
 
 *For use with the LCL-AD505 5V DC power supply

 

 


 

MONOCHROME
1/2" Interline transfer CCD image sensor
1/4" IT CCD Image sensor
This is an ultra miniature, lightweight cylindrical camera. Two standard lenses are available (G3.8mm & P3.7mm). Using the GW-H001, the mounting requirements for the camera are the same as for any standard camera mounting. Horizontal resolution: 380TV lines, requiring a minimum illumination of 0.8 lx. F2.0 (G3.8) and 4.0 lx. F4.5 (P3.7).
1/4" IT CCD Image sensor
Ultra miniature, slim, lightweight camera (30g). Two standard lenses are available (G3.8 and P3.7). Using the GW-B001, the mounting requirements for the camera are the same as for any standard camera mounting. Horizontal resolution: 380TV lines. A minimum required illumination of 0.8 lx. F2.0(G3.8) and 4.0 lx. F4.5(P3.7).
1/3" IT CCD Image sensor
Lightweight and compact with high resolution. Number of effective pixels: 380K EIA and 440K CCIR) in the sensing area. 8 shutter speeds available. A minimum illumination of 0.01 lux, F1.4 at high position in AGC and employing Backlight compensation function (BLC). Equipped with External Synchronization Function. Horizontal resolution: 550TV lines.
1/3" IT CCD Image sensor
Number of effective pixels 250K (EIA) and 290K (CCIR) in sensing area. 8 shutter speeds are available. Horizontal resolution: 400TV lines requiring a minimum illumination of 0.05 lx. F1.4.
1/3" IT CCD Image sensor
Compact size. Number of effective pixels 250K (EIA) and 290K (CCIR) in sensing area. Electronic iris ON/OFF included. Horizontal resolution: 400TV lines. Minimum required illumination, 0.1 lx. F1.2.
1/2" IT CCD Image sensor
Introducing the new high sensitive CCD sensor, visibility is assured in conditions with a minimum illumination of 0.0003 lx. (F1.4).
1. Approx. 2.5 times more sensitive in the visible ray wavelength.
2. Approx. 3 times more sensitive (940nm) in the near-infrared wavelength.
3. Smear can be reduced by approx. -10dB.
* Using an infrared beam (700nm~950nm) an object can be monitored in darkness. High resolutions of 380K (EIA) 440K (CCIR) pixels (570 horizontal TV lines). * Comparing the new GW-902H with the deleted model GW-902A
1/2" IT CCD Image sensor
Horizontal resolution: 570TV lines. Minimum required illumination, 0.01 lx. F1.4 (AGC: Low) and 0.003 lx. F1.4 (AGC: High). Selectable flickerless function. Backlight compensation (BLC) switch provided. AGC ON/OFF selection switch.
1/2" IT CCD Image sensor
High definition: 550TV lines cylindrical camera. With the GW-H003, the mounting requirements for the camera are the same as for any standard camera mounting. Minimum required illumination, 0.1 lx. F1.2.
1/3" IT CCD Image sensor
Miniature line-lock camera with AC24V power supply. A wide range of phase is adjustable(-+120 degree). Low power consumption(max. 1.3w). Electronic iris and Automatic backlight compensation are provided.
(High horizontal resolution: 570TV lines=GW-107LH)
 
 
   
COAXIAL TRANSMISSION
1/3" IT CCD Image sensor Color
It employs DSP (Digital Signal Processing). White balance corrections are selectable in accordance with your required application. Automatic correction, Fluorescent lamps (4200K or 5100K), Daylight (6300K), Incandescent lamp (3200K). Backlight compensation, AGC, and Gamma ON/OFF switches are provided. Two methods of power supply:
1.The power source and video signal are transmitted on a single-line coaxial cable or, 2. A separate DC12V-jack (DC12V input) connected into the rear-panel. Horizontal resolution: 450TV lines. Minimum required illumination, 1.0 lx. F1.2 (AGC: High).
1/4" IT CCD Image sensor Monochrome
An ultra miniature sized camera. The power source and video signal are transmitted on a single-line coaxial cable. Detachable microlenses with f:2.5mm, f:2.9mm, f3.8mm, f6.0mm, f8.0mm, or f:12mm. The standard microlens included on the GW-670CX is the f:3.8mm. Easy to mount on a tripod. Horizontal resolution: 380TV lines. Minimum required illumination, 0.8Lx. F2.0 (G3.8).
1/3" IT CCD Image sensor Monochrome
The audio signal as well as the power source and video signal are transmitted on a single-line coaxial cable. The detachable miniature condensor microphone is included as standard. 8 selectable shutter speeds available. Horizontal resolution: 400TV lines. Minimum required illumination, 0.05 lx. F1.4.
 
DOME TYPE
1/4" IT CCD Image sensor Color
A lightweight (145g) compact camera. Main features include, white balance function and electronic iris function. Standard lens is f3.8mm, F2.0. Horizontal and vertical rotations of the camera are adjusted manually. Horizontal resolution: 320TV lines. Minimum required illumination, 5 lx. F2.0. Power supply, DC 6 Volts.
1/3" IT CCD Image sensor Color
It employs DSP (Digital Signal Processing). High horizontal resolutions of over 460 (NTSC) and 450 (PAL)TV lines. A clear picture can be obtained for any object by using the 12 X power zoom lens in combination with real-time focusing function. It employs endless horizontal rotation through 360. A single coaxial cable (3C2V) enables the multiplex transmission to combine the GW-208 with the GW-208CB. Minimum required illumination, 7.0 lx. F1.8.
1/4" IT CCD Image sensor Monochrome
Lightweight (80g) compact camera. f3.8mm standard lens included. Horizontal and vertical rotations of the camera are adjusted manually. Horizontal resolution: 380TV lines. Minimum required illumination, 1.6 lx. F2.0.

 

NEW !

LOWER LIGHT


 

 

 
LCL-903HS (EIA/CCIR)
 
Highly Sensitive CCD Sensor / Infrared Image
 
Sensor: 1/3" Interline Transfer
Pixels:
EIA 811 (H) x 508 (V)
CCIR 795 (H) x 596 (V)
Cell Size: EIA 6.35um (H) x 7.4um (V)
CCIR 6.5um (H) x 6.25um (V)
Sync System:
Internal
Scanning System:
2:1 Interlace
Video Output:
1.0 V p-p 75 ohms (Unbalanced) BNC
Resolution:
500 TV Lines- 380K Pixels
Min. Illumination:
0.0003 Lux (AGC: HI)
S/N Ratio:
>50dB (AGC OFF) "CS" Mount
Lens Mount:
"CS" Mount
Shutter Speed:
Selectable
Backlight:
ON/OFF
Gamma:
0.45-1
AGC:
ON/OFF - High/Low
Power Supply:
12V DC + 10% (WAT-AD912)
Operating Temp:
-10ºC - +40º C
Storage Temp:
-30ºC - +70º C
Weight:
Approx. 130g
Camera Dimensions
 

 34 mm x 37mm x 52mm

 

64mm Including the BNC

 

1.34" x 1.45" x 2.04" 

 

2.51" Including the BNC

 *For use with the WAT-AD912 12V DC power supply

 

 

   
LCL-903K (EIA/CCIR)
 
 
Sensor: 1/3" Interline Transfer
Pixels:
EIA 811 (H) x 508 (V)
             CCIR 795 (H) x 596 (V)
Cell Size: EIA 6.35um (H) x 7.4um (V)
                 CCIR 6.5um (H) x 6.25um (V)
Sync System:
Internal
Scanning System:
2:1 Interlace
Video Output:
1.0 V p-p 75 ohms (Unbalanced) BNC
Resolution:
500 TV Lines- 380K Pixels
Min. Illumination:
0.0003 Lux (AGC: HI)
S/N Ratio:
>50dB (AGC OFF)
Lens Mount:
"CS" Mount
Shutter Speed:
Selectable
Backlight:
ON/OFF
Gamma:
0.45-1 / 0.6 / 1.0
AGC:
ON/OFF - High/Low
Power Supply:
12V DC + 10% (WAT-AD912)
Operating Temp:
-10ºC - +40º C
Storage Temp:
-30ºC - +70º C
Weight:
Approx. 130g
Camera Dimensions
 

 34 mm x 37mm x 52mm

 

64mm Including the BNC

 

1.34" x 1.45" x 2.04" 

 

2.51" Including the BNC

 *For use with the WAT-AD912 12V DC power supply

 

 

   
LCL-811K (EIA/CCIR)
 
 
Sensor: 1/3" Interline Transfer
Picture Element:
EIA=537(H) x 508(V) CCIR= 15.625 KHz
Sync System:
Internal
Scanning System:
2:1 Interlace
Video Output:
1.0 V p-p 75 ohms
Resolution:
400 TV Lines
Min. Illumination:
0.0001 Lux (AGC: HI)
S/N Ratio:
>50dB (AGC OFF)
Lens Mount:
"CS" Mount
Backlight:
Selectable
Gamma:
0.45-1 / 0.6 / 1.0
AGC:
ON/OFF - High/Low
Power Supply:
12V DC + 10% (WAT-AD912)
Operating Temp:
-10ºC - +40º C
Storage Temp:
-30ºC - +70º C
Weight:
Approx. 82g
Camera Dimensions
 

 34 mm x 37mm x 52mm

 

64mm Including the BNC

 

1.34" x 1.45" x 2.04" 

 

2.51" Including the BNC

 *For use with the WAT-AD912 12V DC power supply

 


 

 

LCL-902K
0.00015 Lux
 
Image Sensor: 1/2" CCD
Pixels:EIA 811 (H) x 508 (V)
           CCIR 795 (H) x 596 (V)
Cell Size:EIA 8.4um (H) x 9.4um (V)
           CCIR 8.6um (H) x 8.3um (V)
Sync System:
Internal
Scanning System:
2:1 Interlace
Video Output:
1.0 V p-p 75 ohms (Unbalanced) BNC
Resolution:
570 TV Lines - 380K Pixels
Min. Illumination:
0.00015 Lux (AGC On)
S/N Ratio:
> 50dB (AGC OFF)
Lens Mount:
"CS" Mount
Gamma:
0.45 / 0.6 / 1.0
AGC:
On 18dB
Power Supply:
12V DC + 10% (WAT-AD912)
Storage Temp:
-30ºC - +70º C
Operating Temp:
-10ºC - +40º C
Weight :
Approx 130g

 

Camera Dimensions
 

 34 mm x 37mm x 52mm

 

64mm Including the BNC

 

1.34" x 1.45" x 2.04" 

 

2.51" Including the BNC

 

 *For use with the WAT-AD912 12V DC power supply

 

 

 

 

WAT-902HS (EIA/CCIR)
 
Highly Sensitive CCD Sensor / Infrared
 
Image Sensor: 1/2" Interline Transfer
Pixels:
EIA 811 (H) x 508 (V)
CCIR 795 (H) x 596 (V)
Cell Size: EIA 6.35um (H) x 7.4um (V)
CCIR 6.5um (H) x 6.25um (V)
Sync System:
Internal
Scanning System:
2:1 Interlace
Video Output:
1.0 V p-p 75 ohms (Unbalanced) BNC
Resolution:
570 TV Lines - 380K Pixels
Min. Illumination: 0.00015 Lux (AGC: HI)
S/N Ratio:
>50dB (AGC OFF)
Lens Mount:
"CS" Mount
Gamma:
0.45-1
AGC:
ON18dB
Power Supply:
12V DC + 10% (WAT-AD912)
Storage Temp:
-30ºC - +70º C
Operating Temp:
-10ºC - +40º C
Weight:
Approx 130g
Camera Dimensions
   32mm(W) x 32mm(H) x 32mm(L)   1.25" x 1.25" x 1.25"
 *For use with the WAT-AD912 12V DC power supply

Coming Soon WAT-902C

New Upgrade From WAT-902B 

WAT-902C (EIA/CCIR)
 
Image Sensor: 1/2" B&W CCD
Pixels:
400 K
Resolution: 570 TV Lines
Min. Illumination:
0.01 Lux @ f1.2 (AGC Off)
S/N Ratio:
>50dB
Electronic Iris & Shutter: Speed Selectable
Backlight: On/Off
Lens Mount:
"CS" Mount
Gamma:
0.45-1
AGC:
On/Off
Auto Iris Lens: Video Type
Video Connector: BNC
Power Supply:
12V DC + 10% (WAT-AD912)
Camera Dimensions
   34mm(W) x 34mm(H) x 39mm(L)   1.33" x 1.33" x 1.54"
 *For use with the WAT-AD912 12V DC power supply

WAT-660-D-37 (EIA/CCIR)
ULTRA MINIATURE
BLACK & WHITE
CCD CAMERA
with PINHOLE LENS
 
Pick-Up Element: 1/4" CCD Image Sensor
Number Of Pixels: EIA = 537(H) x 550(V) Unit
Cell Size: EIA=7.I5um(H) x 5.55um(V)
Sync System: Internal, Crystal Oscillator
Scanning System: 2:1 Interlace
Resolution: >380 TV Lines
S/N Ratio: >46dB
Gamma: 0.45
AGC: >18dB
Minimum Illumination: 0.5 Lux at f1.2
Electronic Shutter: 1/60-1/10,000 sec (Iris Control)
Video Output: 1VP-P 75 ohms (Unbalanced)
Power Supply: 9V DC ± 10%
Current: 100mA
Open F: F2.5
Lens: 3.7mm Pinhole
Angular Field of View: 26V x 34'H (Diagonal 37)
Structure: 2 Groups, 2 Pieces
Operating Temp: -10ºC - +40ºC
Storage Temp: -30ºC - +70ºC
Weight: Approx 30g (1.06 oz)
Camera Dimensions

29mm(W) x 29mm(H) x 13mm(L)

1.16 X 1.16 X 0.51"

*For use with the WAT-AD502A 9V DC power supply


WAT-660D-60 (EIA/CCIR)
ULTRA MINIATURE
MONOCHROME CCD CAMERA
 
 
 
Pick-Up Element: 1/4" CCD Image Sensor
Number Of Pixels: EIA = 537(H) x 550(V) UNIT
Cell Size: EIA=7.I5um(H)x5.55um(V)
Sync System: Internal, Crystal Oscillator
Scanning System: 2:1 Interlace
Resolution: >380 TV Lines
S/N Ratio: >46dB
Gamma: 0.45-1
AGC: MORE THAN 18dB
Minimum Illumination: 0.5 Lux at f1.2
Electronic Shutter: 1/60-1/10,000 sec (Iris Control)
Video Output: 1VP-P 75 ohms (Unbalanced)
Power Supply: 9V DC ± 10%
Current: 100mA
Open F: F2.5
Lens: 6mm Micro Lens
Angular Field of View: 26V x 34'H (Diagonal 37)
Structure: 2 Groups, 2 Pieces
Operating Temp: -10ºC - +40ºC
Storage Temp: -30ºC - +70ºC
WEIGHT: Approx 30g (1.06 oz)
 
Also available with 2.5mm, 3.8mm,
8mm, 25mm Micro Lens
Camera Dimensions

29mm(W) x 29mm(H) x 23mm(L)

1.16 X 1.16 X 0.93"

*For use with the WAT-AD502A 9V DC power supply


 
WAT-704R 1/4" (EIA/CCIR)
MINIATURE BLACK & WHITE
CCD CAMERA
 
 
Pick-Up Element: 1/4" CCD Image Sensor
Number of Pixels: EIA = 537(H) x 505(V)
Unit Cell Size: EIA = 7.15 Am(H) x 5.55,um(V)
Sync System: Internal, Crystal Oscillator
Scanning System: 2:1 Interlace
Resolution: 380 TV Lines
S/N Ratio: >46dB
Gamma: 0.45-1
AGC: >18dB
Minimum Illumination: 0.5 Lux at f1.2
Electronic Shutter: ON: Normal - 1/100,000 (Auto)
OFF: Normal
Video Output: 1VP-P 75 ohms (Unbalanced)
Power Supply: 9V DC + 10%
Current: 10mA
Open F: F2.0
Focal Length: 3.8mm Micro Lens
Lens Options: 6mm, 8mm,12mm, 25mm
Angular Field of View: 40ºV x 51ºH
Operating Temp: -10ºC - +40ºC
Storage Temp: -30ºC - +70ºC
Weight: 25g (0.88oz)
Camera Dimensions

Ø18mm x 50mm(L)

Ø0.71 x 1.95"

*For use with the WAT-AD502A 9V DC power supply


WAT-704R-37 (EIA/CCIR)
1/4" MINIATURE
BLACK & WHITE
CCD CAMERA
 
1/4" B&W CCD Image Sensor
Number of Pixels: 280K Pixels
Resolution: 380 TV Lines
Minimum Illumination: 0.5 Lux f1.2
Electronic Shutter (1/60 - 1/10,000 Sec)
Lens: 3.7mm Flat Pinhole Lens
Operation Temperature: -10° ~ +40°C
Power Supply: 9V DC ±10% (110mA)

Camera Dimensions

Ø18mm x 37mm(L)

Ø0.71 x 1.45"

*For use with the WAT-AD502A 9V DC power supply


WAT-660GD (EIA/CCIR)
 
1/4" B&W CCD Dome Camera
Number of Pixels: 537(H) x 597(V)
Resolution: 380 TV Lines
Minimum Illumination: 1.6 Lux @ 2.0
Lens: 3.8mm Micro Lens
Pan & Tilt: 60º (Pan) 180º (Tilt)
Auto Electronic Iris: (1/60 -1/10,000 Sec)
Operation Temperature: -10° ~ +40°C
Power Supply: 9V DC ± 10% (100mA)
 
Also available with 2.5mm, 6mm, 8mm Micro Lenses
Camera Dimensions

Ø53mm x 46mm(L)

Ø2.09 x 1.81"

*For use with the WAT-AD502A 9V DC power supply